Vantage HD Firmware

[sami.sami]

Emu 2.5802 for Vantage HD 6000 / 7100 / 8000

only Cardfix

[mikame]

Main Firmware 01.03T-O

23.04.2010 Version 01.03T-O
Verbesserungen:
- Live Bild im OLED auf HD Sendern
o Beim Schalten auf den HD Sender wird dann automatisch das Senderlogo und der Name eingeblendet, beim zurückschalten auf einen SD Sender wird wieder das Live Bild angezeigt.
- Timer Aufnahme startet nun auch wenn man einen Film von der Festplatte wiedergibt.
- PIP mit Bildübergang auf „An“ ist nun möglich
- Nach entschlüsseln einer verschlüsselten Aufnahme wird nun die Zeit bei der Wiedergabe im VANTAGE Player richtig angezeigt.
o Die Zeit in der Medialiste wird noch nicht korrekt angezeigt ( Chipsatztreiber Problem muss von ST behoben werden ).
- Schneide Funktion verbessert.
o Es muss nur noch Start und Endposition gesetzt werden. Durch Drücken der Option-Taste wird der Film geschnitten.
- Bug beim Umschalten der Kanäle behoben wenn die Auflösung auf „ Auto“ gestellt ist.
- Bestätigungsfenster zum Herunterfahren der Box nach einem Timer wurde auf 1 Minute verlängert.
Wichtig

HERE

[alouan]

Neue Software für den VANTAGE VT-1

Version 01.04T-O

[Frode Lindeberg]

Emu 2.5802 for Vantage HD 6000 / 7100 / 8000

only Cardfix

Will this cardfix clear the HD channels on Sirius (Viasat)

[aguda]

Version 02.61T-O

          
09.07.2010 Version 2.61
Verbesserungen:
- Aufnahme Bugfix
o Fehler wie Bild- und Tonaussetzer sind behoben. Dies gillt nur für Aufnahmen die mit der neuen Software gemacht werden. Die Änderung hat keinen Einfluss auf die bereits gemachten Aufnahmen
- Kanallisten Update
o ARD und ZDF HD auf den ersten beiden Plätzen

[mikame]

Version 01.06T-O BETA4

- Unicable background recording
o The receiver will start the timer in the background now and no longer switches to
- Added fast boats.
o enable this option through the boot process is accelerated (Note: The standby power consumption increases by!)
- Umlauts are now displayed in the player and the timer recording properly.
- Added option to turn off the system messages
- Quality of thumbnails in JPG's improved
- SD output option in the Video menu settings
o To: Scart connection has always picture.
o car: when a HDMI cable is plugged in, turned off, the Scart connector. This makes the box faster to use. Affects mainly for Linux.
- Timer standby circuit added.
o If the box is already in use when starting a timer to stop this even after the timer (even if the option to Standby "is placed). If the speaker is started by the timer turns them off, as in the standby field selected. This option will not be activated.

[sami.sami]

New Software for VANTAGE VT-1

Version 01.07T-O

Improvements:
- Unicable background recording
o The receiver will start the timer in the background now and no longer switches to
- Added fast boats.
o enable this option through the boot process is accelerated (Note: The power consumption in standby rises
in fact! )
- Umlauts are now displayed in the player and the timer recording properly.
- Added option to turn off the system messages
- Quality of thumbnails in JPG's improved
- SD output option in the Video menu settings
o To: Scart connection has always picture.
o car: when a HDMI cable is plugged in, turned off, the Scart connector. This makes the box more quickly in
operation. Does especially in Linux.
- Timer standby circuit added.
o If the box is already in use when starting a timer to stop this even after the timer (even if the
Standby option to "on" stands). If the speaker is started by the timer turns the elected as the standby box
from. This option will not be activated.
- Last Unicable control
o Following up the software deletes the current Unicable settings. In the menu, there are now only
Unicable the option "Off" or "on" by pressing the OK button. In the new window now, the IF frequency
eingegben be and the corresponding number from 0-7. If no number is correct is no reception
possible. After entering the frequency and the number, the signal is examined, the signal is on the cable is
the setting is stored.
- Added German channel list
o The new Sky HD channels were added to the list.
- Fix special characters
o There are again all the letters in the EPG display.

[carolina55]

New for 6000/7100/8000

[Edo2]

Neue Software für die VANTAGE VT-1

Version 1.08M-O

[tokoroko]

Vantage HD Original Firmware Version 2.69 / 10.11.2010

Release note

IMPORTANT please read:

Please consider the "History Note" read for already implemented functions. If after the update problems
arise, perform a factory reset with the menu item "Installation / Basic settings / factory settings"
by.

Please backup before the factory reset your settings -> Menu / Channel Setup / Software Manager

To perform a software update:

1. Unzip the file on a USB disk.

2. Now connect the USB device to the receiver,

3. The receiver then from the menu / multimedia / USB update the file "*. dlp" from USB disk

4. Confirm the question with "Yes"

5. The update is complete when the receiver restarts.

10/11/2010 Version 2.69

Improvements:

- DVB-T tuner problem solved