En général, ces circuits sont des parasites pour le glitches clock.
Je te conseil de les supprimer et d'attaquer le clock de la carte directement avec le xilink, tu obtiendras un 9B08 10* sur 10.
En général, ces circuits sont des parasites pour le glitches clock.
Je te conseil de les supprimer et d'attaquer le clock de la carte directement avec le xilink, tu obtiendras un 9B08 10* sur 10.
alores là je n'ai rien compris grizou, explique plus
je suis novice, utulise des terminologie simple stp
attaquer le clock de la carte directement avec le xilink ????????????????, tu obtiendras un 9B08 10* sur 10
on obtirens ou sur quelle logiciele on peut voir 9B08 10* sur 10
stp, merci
Originally Posted by Grizou0
bonjour j'ai flashé mon atemel et xilinx
tous est bon avec succès
LA LED EST TOUJOUR ROUGE DE LUNLOOPER
Jai fait chargé le script 7.1 par winexplore
puis j'ai, clicki run script:
il ma donner sa:
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
reconnection
merci
salut
dans win explorer icone : configure parametres
ensuite apliquer les reglages en tennant compte des explications
une fois fait tu donne un nom au reglages : extraction seca2 et tu save
Sub Settings()
Wx.BaudRate = 9600
Wx.ResetBaudRate = 9600
Wx.Parity = 0
' 0 = None, 1 = Odd, 2 = Even, 3 = Mark, 4 = Space
Wx.StopBits = 0
' 0 = 1 stop bit, 1 = 1.5 stop bits, 2 = 2 stop bits
Wx.DTRControl = 1
' Initial state of DTR 0 = off, 1 = on
Wx.RTSControl = 0
' Initial state of RTS 0 = off, 1 = on
Wx.ResetDelay = 0
' In microseconds
Wx.ByteDelay = 0
' In microseconds
Wx.RxByteTimeout = 200
' In milliseconds
Wx.ResetMode = 2
' 0 = No Resets, 1 = ISO Reset (Expect a ATR), 2 = Device Reset (No ATR)
Wx.ResetLine = 0
' 0 = Toggle RTS for Reset, 1 = Toggle DTR for Reset
Wx.ByteConvention = 1
' 0 = Inverse, 1 = Direct
Wx.FlushEchoByte = 0
' 0 = no flush, 1 = flush - A Phoenix interface will echo each byte transmitted.
Wx.FlushBeforeWrite = 0
' 0 = no flush, 1 = flush - Flush the receive buffer before each write to strip off Null bytes.
Wx.IgnoreTimeouts = 1
' 0 = Abort script on a receive timeout, 1 = Ignore all receive timeouts
Wx.ResetAfterTimeout = 0
' 0 = Don't reset after a timeout, 1 = do a reset after a timeout - Not used if "IgnoreTimeouts=0"
Wx.LogTransactions = 0
' 0 = Don't log transactions, 1 = log transactions
Wx.DisplayUSW = 0
' Display USW after script complete 0 = no, 1 = yes
Wx.DisplayFuse = 0
' Display Fuse after script complete 0 = no, 1 = yes
End Sub
apres run script
tu dois avoir cela en reponse fenetre du bas de win explorer
citation
ATR - 3B F7 11 00 01 40 96 70 70 17 0E 6C B6 D6
(9000) -- Instrucción ejecutada sin errores
-------------------------------------------------------------------------------------
INFORMACION DE LA TARJETA (103261054)
-------------------------------------------------------------------------------------
ID:0000|SECA | PPUA:00000000 | FECHA:0/0/1990 | PBM: | KEYS:F0FFFFFFFFFFFFFF
ID:0080|CANALSAT | PPUA:07DA0580 | FECHA:31/1/2008 | PBM:00101E25C0000004 | KEYS:F05D5C515EFFFFFF
ID:0081|CANAL+ | PPUA:07DA05B1 | FECHA:31/1/2008 | PBM:0000000000000002 | KEYS:F05C5D515EFFFFFF
ID:0082|SPARE-A | PPUA:00000000 | FECHA:0/0/1990 | PBM:0000000000000002 | KEYS:F0F2F3FFFFFFFFFF
Executing Script: D:\Satellite\Mes fichiers reçus\FF V7.1a&- V7.1b By-.xvb
DATE: 25/12/2007 TIME: 19:59:51
--------------------
Atmel Software: V5B5 la tu dosi voir le atmel Vers. que ta prog
--------------------
-------------------------------------------------------------------
ATR: 3B F7 11 00 01 40 96 70 70 17 0E 6C B6 D6 90 00 - ATR Level 1 d e ta carte
-------------------------------------------------------------------
---------------------
UA : 000000000xxxxxxxxxxxxx donnne privée efface par moi
---------------------
------------------------------------
| GENERAL |
------------------------------------
| DATA : 0000000xxxxxxxxxx | donnne privée efface par moi
| UA : 000000000xxxxxxxxx | donnne privée efface par moi
| UA DEC: xxxxxxxxxxxxx | donnne privée efface par moi
| STARTUP REC : 00000000000000000001 | type pays du demo
| VERSION : 0799004C0080050F0B02 |
------------------------------------
----------------------------------------------------------------------------------------------------------------------
| Nr | ID | NAME | PPUA | DATE | PBM | KEY INDEX |
----------------------------------------------------------------------------------------------------------------------
| 00 | 0000 | 53454341202020202020202020202020 | 00000000 | 0000 | FFFFFFFFFFFFFFFF | F0FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 01 | 0080 | 43414E414C5341542020202020202020 | 07DA0580 | 243F | 00101E25C0000004 | F05D5C515EFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 02 | 0081 | 43414E414C2B20202020202020202020 | 07DA05B1 | 243F | 0000000000000002 | F05C5D515EFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 03 | 0082 | 53504152452D41202020202020202020 | 00000000 | 0000 | FFFFFFFFFFFFFFFF | F0F2F3FFFFFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
----------------------------------------
****** SCAN MASTERKEY (V7GENIUS) ******
----------------------------------------
----------------------------------------
****** SCAN MASTERKEY (V7GENIUS) ******
----------------------------------------
SEND: 10F70E06C47C8F80800080FC2003760A20000109 20000B0A07FDFE
INS: C10EFEFEFF | GLITCH: 0376 0001 000B 0A07FDFE | REP: 4
----------------------------
MASTERKEY : xxxxxxxxxxxxxxxx avec cette clefs tu peu decoder les autres clefs crypté mk00 mk1 via le soft ins builder onglet masterkey
----------------------------
----------------------------
EPROMKEY : xxxxxxxxxxxxxxxxxx
----------------------------
KEY F2 PROV 03 : 86A271A59C4239DA
COMPLETE RECORD : F286A271A59C4239DADE0083
KEY 50 PROV 03 : 0AD40EA1C43F81B4
COMPLETE RECORD : 500AD40EA1C43F81B4EA00C3
KEY F0 PROV 03 : 54ABDB951977FC1D
COMPLETE RECORD : F054ABDB951977FC1DF70083
KEY 51 PROV 02 : 9D2222AE46F6C6F8
COMPLETE RECORD : 519D2222AE46F6C6F8250082
KEY 5D PROV 02 : 02CB7CB826877A1E
COMPLETE RECORD : 5D02CB7CB826877A1E5C0082
KEY 5C PROV 02 : BB01E36190D51A84
COMPLETE RECORD : 5CBB01E36190D51A84A00082
KEY 50 PROV 02 : BEAC847B62DDDCDB
COMPLETE RECORD : 50BEAC847B62DDDCDB5000C2
KEY F0 PROV 02 : C50E54425AE2887B
COMPLETE RECORD : F0C50E54425AE2887B670082
KEY 51 PROV 01 : C04953D2196E15E7
COMPLETE RECORD : 51C04953D2196E15E7FD0081
KEY 5C PROV 01 : 2CFE9C5EF8403261
COMPLETE RECORD : 5C2CFE9C5EF8403261B40081
KEY 5D PROV 01 : C208A202B18897F1
COMPLETE RECORD : 5DC208A202B18897F1730081
KEY 50 PROV 01 : 8BCB386BA1B2607B
COMPLETE RECORD : 508BCB386BA1B2607B8800C1
KEY F0 PROV 01 : 7A51FFE56E935F65
COMPLETE RECORD : F07A51FFE56E935F659B0081
KEY 70 PROV 00 : 13EB1F676C763BA5
COMPLETE RECORD : 7013EB1F676C763BA54900C0
KEY F0 PROV 00 : 33F00C66A6702F84
COMPLETE RECORD : F033F00C66A6702F84B10080
avec la clefs f0 de seca tu pourras mettre ta carte a jour date pbm clefs 0c 0d 0e
en sugnat avec la mk 00 seca
CET UN EXEMPLE il te faut sortir tes propres donnée de ta carte
a ce stade la si apres la lecture carte rien ne sort et tu a que des FFFFFFFFFFFFFFFFFFFFFFFF
il faudras modifier le unlooper coupure piste et/ou dessoudage du potentiometre
dessouder 2 des 3 pattes suffisent (pour ressoudage par la suite )
@ +
merci, le probleme, ou je trouve
un autre ami, ma dis que winexplore ne dialogue pas avec la carte
meme on ne coupe pas la piste, le winexplore normalement dialogue avec la carte quelque siot??
salut
ta mis les reglage que j'ai poste c'est ceux la pour unlooper carte seca2
tu dois avoir cela en reponse fenetre du bas de win explorer
citation
ATR - 3B F7 11 00 01 40 96 70 70 17 0E 6C B6 D6
(9000) -- Instrucción ejecutada sin errores
-------------------------------------------------------------------------------------
INFORMACION DE LA TARJETA (103261054)
-------------------------------------------------------------------------------------
ID:0000|SECA | PPUA:00000000 | FECHA:0/0/1990 | PBM: | KEYS:F0FFFFFFFFFFFFFF
ID:0080|CANALSAT | PPUA:07DA0580 | FECHA:31/1/2008 | PBM:00101E25C0000004 | KEYS:F05D5C515EFFFFFF
ID:0081|CANAL+ | PPUA:07DA05B1 | FECHA:31/1/2008 | PBM:0000000000000002 | KEYS:F05C5D515EFFFFFF
ID:0082|SPARE-A | PPUA:00000000 | FECHA:0/0/1990 | PBM:0000000000000002 | KEYS:F0F2F3FFFFFFFFFF
Executing Script: D:\Satellite\Mes fichiers reçus\FF V7.1a&- V7.1b By-.xvb
DATE: 25/12/2007 TIME: 19:59:51
--------------------
Atmel Software: V5B5 la tu dosi voir le atmel Vers. que ta prog
--------------------
-------------------------------------------------------------------
ATR: 3B F7 11 00 01 40 96 70 70 17 0E 6C B6 D6 90 00 - ATR Level 1 d e ta carte
-------------------------------------------------------------------
---------------------
UA : 000000000xxxxxxxxxxxxx donnne privée efface par moi
---------------------
------------------------------------
| GENERAL |
------------------------------------
| DATA : 0000000xxxxxxxxxx | donnne privée efface par moi
| UA : 000000000xxxxxxxxx | donnne privée efface par moi
| UA DEC: xxxxxxxxxxxxx | donnne privée efface par moi
| STARTUP REC : 00000000000000000001 | type pays du demo
| VERSION : 0799004C0080050F0B02 |
------------------------------------
----------------------------------------------------------------------------------------------------------------------
| Nr | ID | NAME | PPUA | DATE | PBM | KEY INDEX |
----------------------------------------------------------------------------------------------------------------------
| 00 | 0000 | 53454341202020202020202020202020 | 00000000 | 0000 | FFFFFFFFFFFFFFFF | F0FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 01 | 0080 | 43414E414C5341542020202020202020 | 07DA0580 | 243F | 00101E25C0000004 | F05D5C515EFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 02 | 0081 | 43414E414C2B20202020202020202020 | 07DA05B1 | 243F | 0000000000000002 | F05C5D515EFFFFFFFFFFFFFFFFFFFFFF |
----------------------------------------------------------------------------------------------------------------------
| 03 | 0082 | 53504152452D41202020202020202020 | 00000000 | 0000 | FFFFFFFFFFFFFFFF | F0F2F3FFFFFFFFFFFFFFFFFFFFFFFFFF |
ca c'ets les mm infos que via le phoneix si tu est arrive la et encore un fois y a rien a couper pour le momment
si tu a pas ca = reglage pas bon a revoir
salut regarde ce UE ME MARQUE/
Invalid Hex digit O on line 2 of input file
ta rentrer les reglages ????
ta charge quoi comme script xvb
test un autre scrit d'extaration v7.1 a
ra regler ton port com
ta carte est elle lu avec un lecteur phoenix ? ?
Executing Script: C:\Documents and Settings\couscous\Bureau\preparation unlooper\unlooper\FF V7.1a&- V7.1b\SECA2ADEL
Invalid Hex digit O on line 2 of input file
Executing Script: C:\Documents and Settings\couscous\Bureau\preparation unlooper\unlooper\FF V7.1a&- V7.1b\SECA2ADEL
Invalid Hex digit O on line 2 of input file
----------------- UPDATING SETTINGS WINEXPLORER --------------------
Executing Script: C:\Documents and Settings\couscous\Bureau\preparation unlooper\unlooper\FF V7.1a&- V7.1b\FF V7.1a&- V7.1b By-.xvb
DATE: 17/09/2010 TIME: 21:02:53
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Script Error on Line 1915
Script Aborted By User
----------------- UPDATING SETTINGS WINEXPLORER --------------------
Executing Script: C:\Documents and Settings\couscous\Bureau\preparation unlooper\unlooper\FF V7.1a&- V7.1b\FF V7.1a&- V7.1b By-.xvb
DATE: 17/09/2010 TIME: 21:04:03
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Script Error on Line 1915
Script Aborted By User
----------------- UPDATING SETTINGS WINEXPLORER --------------------
Executing Script: C:\Documents and Settings\couscous\Bureau\preparation unlooper\unlooper\FF V7.1a&- V7.1b\FF V7.1a&- V7.1b By-.xvb
DATE: 17/09/2010 TIME: 21:05:50
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
Retrying
Script Error on Line 1915
Script Aborted By User
Posting Permissions
Reply With Quote