Put your Old Ice Scraper's back to some Work

[passete]

Just converted in few minutes back, two Old ice scrapers to do something usefull.

Only Needed Cas Interface (or other programer on phoenix) a Usb and a Serial cable

1 Old opos 105 converted to cerebro and added files to Orf/Aust

2 Old Titanium 2 Converted to cerebro and added files to Orf/Aust

So, if you have some old cards and want to play a litle bit, here what you need to do:
Run the script to Virginize the card (use the one adapted for your card), once the script is finish
Run the script to Load OS to Virgin card (chose cerebro)
Run cas studio, go to cards, cerebro load the Orf file and "Write", done

Cards are working 100% with Oscam

Will atach a pack with all files needed (Winex .ini inside)

Big Thanks to 007.4 and Others ...

[thor_]

not working titanium2 to cerebro
some loader missing

[zed44]

Hi to all

working from Opos 1.05 to Cerebro (with the ORF files included)

thx Passete and thx to 007.4

[passete]

not working titanium2 to cerebro
some loader missing

First virginize your card (use the good script), after load cerebro OS and finaly write cerebro file with cas studio loader !
My Titanium 2, was transformed on Opos 103 a few years ago, i just had to virginize using script for opos 103, then loaded cerebro OS.

[thor_]

First virginize your card (use the good script), after load cerebro OS and finaly write cerebro file with cas studio loader !
My Titanium 2, was transformed on Opos 103 a few years ago, i just had to virginize using script for opos 103, then loaded cerebro OS.

load cerebro OS

with witch programm

[zed44]

load cerebro OS

with witch programm

use the script Load_OS_to_virgin_6464c_v7.xvb and then choose cerebro os file from 6464c OS Loader & OS Bin Files folder in the toolkit archive

regards

[thor_]

witch program?cas,m2+ loader...

i don t see any exe file to run

[zed44]

Hi

use winexplorer 5 to run the scripts. If you don't have it, search here in the upload center or googled it

regards

[passete]

witch program?cas,m2+ loader...

i don t see any exe file to run

Open The Script, then click on the 'litle hand" to run it !

[thor_]

Load_OS_to_virgin_6464c_v7.xvb

Trying to reset card...
Reset Successful

ATR: 3B EC 00 00 40 32 54 49 54 41 4E 49 55 4D 00 11 01 06

Convention: DIRECT
Protocol: T=0
TB1 = 00
TC1 = 00
TC2 = 32

Historical Bytes: 54 49 54 41 4E 49 55 4D 00 11 01 06
T I T A N I U M

Programming Voltage = 0.0 volts
Programming Current = 25ma
Maximum Clock Frequency = 0.0MHz

This card uses an internal clock:
Work ETU = 0.0001041667 seconds
Guard Time = 0.0012500000 seconds
Baud Rate After Reset = 9600

Script Error on Line 275


Sub WinExpSettings()
Wx.BaudRate=9600

now problem with script :)