Hello
Anyone knows how the cccam.cfg shuld look , and where to put the "cws server.com user pass 01 02 03 04 ect. .. 13 14 wlan serv
On a Dreambox 800 HD
regards
Hello
Anyone knows how the cccam.cfg shuld look , and where to put the "cws server.com user pass 01 02 03 04 ect. .. 13 14 wlan serv
On a Dreambox 800 HD
regards
Hi there guys,
great info shared here. I am not very good with that stuff although managed to install gemini and cccam.
One silly question - do I need to have an actual card in the slot of the my DM800SE to be able to share with other people?
What I mean is - in order to enter F line in my Config file I should have something to offer, correct?
And then the next question is what is a good card to buy? I see that AlJazeera ship their cards very fast and they do not look expensive - the 10 sport channels are 125 EUR per year. On anothe hand services like Sky UK and Italy are quite expensive.
Your advice please?
Cheers
B
Originally Posted by boboxjordan
Back again
Any way boboxjordan yes indeed it would be wise to have atleast 1 local card to share, withou local it is very hard to get someone to share his card(s) with you.
And to get a card i sugest to get one in your country where you live in, as above beter have 1 local card then nothing.
some new tips i have found makes the c line biger then they should be but atleast it stops you from receiving old cards that wont work either.
C: name server port username password no { 0:0:1, 100:3, 100:4, 100:5, 100:9, 100:A, 100:c, 100:d, 100:E, 100:f, 100:10, 100:11, 100:12, 100:13, 100:14, 100:19, 100:1A, 100:1B, 100:1c, 100:1d, 100:20, 100:21, 100:25, 100:26, 100:29, 100:2E, 100:31, 100:33, 100:34, 100:37, 100:64, 100:66, 100:67, 100:6b, 100:6d, 100:70, 100:71, 100:72, 100:73, 100:8C, 100:A0, 100:A1, 100:A2, 100:A3, 100:100, 100:8227, 100:beef, 100:ffff, 500:80, 500:500, 500:1540, 500:1570, 500:2100, 500:2500, 500:4800, 500:5500, 500:7000, 500:7010, 500:8000, 500:8800, 500:8c00, 500:8c10, 500:9c00, 500:9C10, 500:9C20, 500:9C30, 500:9C40, 500:a000, 500:A800, 500:A810, 500:A820, 500:AC00, 500:B400, 500:C, 500:C010, 500:C020, 500:C030, 500:c400, 500:c410, 500:C800, 500:C810, 500:C820, 500:C830, 500:C840, 500:C850, 500:C860, 500:C870, 500:D400, 500:D540, 500:D800, 500:e400, 500:E410, 500:E430, 500:E440, 500:E450, 500:E470, 500:E800, 500:F000, 500:F520, 500:F800, 500:10c00, 500:10c10, 500:10c20, 500:10c30, 500:11000, 500:11c00, 500:12000, 500:12010, 500:12800, 500:12810, 500:12C00, 500:13400, 500:14400, 500:14800, 500:14880, 500:14C00, 500:15000, 500:16400, 500:16800, 500:16810, 500:16C00, 500:16C10, 500:16C20, 500:17000, 500:17010, 500:18c00, 500:19000, 500:19400, 500:19410, 500:19420, 500:19430, 500:19440, 500:1a400, 500:1ac00, 500:20600, 500:20610, 500:20620, 500:20630, 500:20640, 500:20a10, 500:20a20, 500:20a30, 500:20B20, 500:20c00, 500:20c10, 500:20c20, 500:20C30, 500:20C40, 500:21510, 500:21570, 500:21c00, 500:21C10, 500:22100, 500:22110, 500:50000, 618:0, 924:0, 9A0:0, d00:4, d00:8, d00:14, D00:64, D00:68, d01:50, d01:54, D02:80, D02:88, d02:8c, D03:B0, D03:C0, D03:C4, d03:c8, D04:14, d05:c, d0c:c, d0c:10, d0c:14, d0c:18, 1702:6a, 1800:1, 1800:101, 1800:801, 1800:901, 1800:1201, 1800:1301, 1800:1811, 1800:1911, 1800:4001, 1800:4101, 1800:4601, 1800:4701, 1800:4801, 1800:4901, 1800:4A01, 1800:4B01, 1800:6E01, 1800:6F01, 1800:7001, 1800:7101, 1800:7401, 1800:7501, 1800:9401, 1800:9501, 1800:C001, 1800:C101, 1801:7811, 1801:7911, 1802:8C11, 1802:8D11, 4aa0:0 }
note that the part no is that you do not want to use emu behind you have this starting with { 0:0:1 (means you only have local card from server, and is also a good way to check if some one still have a local cord or not, normaly i have it on 3 ( get everything till hop 3)
everything behind are the pid with old card numbers which you do not want to use anyway as they are not valid anymore, but allows a server to fake a local non working card, whit this you are save.
been testing this setup for a while now and works fine for me, and also found that a server in my list suddenly had no local cards (not calling names here), so have to work this out with the person it self, as his original threat was saying he had local cards and now their gone.
So checking the option no { 0:0:1 and set it to 1 is a good way to check if a servers local card is still there or not, again as default you need to put this on 3, higher then 3 is no use and causes only screen freezes.
happy sharing
deltix1
Hi all
I have setup linux pc server for cccam. How do I activate or add clients so that my friends can connect to my cccam server. Thank you
I have no idea how this works on a linux cccam server, but as far i understand this should be the same as if you where using a Dreambox, changes are made in the cccam.cfg (coorect me if i'm wrong).
Hi Guys,
Is an old treat. But I hope it will be answered.
Since a week we have many freezes off the reshared channels.
our f line looks like:
f: user password 3 1 0 { 0:0:1 }
And we have a server with local cards. In a smargo+ reader. Which we share by wan.
could someone can tell me what is going wrong?
Or what we need to change, to make it work stable again.
It always worked well. Till last week.
Thanks in advance.
Here my total config:
-------------------
WEBINFO USERNAME : xxx
WEBINFO PASSWORD : xxx
TELNETINFO USERNAME : xxxx
TELNETINFO PASSWORD : xxx
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 0
#OSD USERNAME :
#OSD PASSWORD :
OSD PORT : 80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
DISABLE EMM : no
LOG WARNINGS: /var/etc/warnings.txt
EXTRA EMM LEVEL : yes
MINI OSD : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
CAID IGNORE FILE : /var/etc/CCcam.ignore
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
SMARTCARD WRITE DELAY: /dev/ttyUSB0 01000
B: /dev/dev/ttyUSB0 06
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 6000000
SMARTCARD WRITE DELAY: /dev/ttyUSB1 01000
B: /dev/dev/ttyUSB1 06
CAMKEY: /dev/ttyUSB0 11 22 33 44 55 66 77 88
CAMKEY: /dev/ttyUSB1 11 22 33 44 55 66 77 88
CAMKEY: /dev/ttyUSB2 11 22 33 44 55 66 77 88
CAMDATA: /dev/ttyUSB0 3C 86 33 AA C0 D3 67 53 3D EC 7B B2 EE ED EB 8C A3 AD A5 2E 58 B9 9B B3 46 72 78 32 77 A1 DA AC 3B 61 06 AD 09 09 77 4E 03 1B 2A 6E 30 19 5B 43 76 83 AD 0F C5 99 B8 7D 08 CE A4 7B E1 B6 C7 6A
CAMDATA: /dev/ttyUSB1 3C 86 33 AA C0 D3 67 53 3D EC 7B B2 EE ED EB 8C A3 AD A5 2E 58 B9 9B B3 46 72 78 32 77 A1 DA AC 3B 61 06 AD 09 09 77 4E 03 1B 2A 6E 30 19 5B 43 76 83 AD 0F C5 99 B8 7D 08 CE A4 7B E1 B6 C7 6A
CAMDATA: /dev/ttyUSB2 3C 86 33 AA C0 D3 67 53 3D EC 7B B2 EE ED EB 8C A3 AD A5 2E 58 B9 9B B3 46 72 78 32 77 A1 DA AC 3B 61 06 AD 09 09 77 4E 03 1B 2A 6E 30 19 5B 43 76 83 AD 0F C5 99 B8 7D 08 CE A4 7B E1 B6 C7 6A
TRY ALL CHIDS : /dev/ttyUSB0
TRY ALL CHIDS : /dev/ttyUSB1
TRY ALL CHIDS : /dev/ttyUSB2
EMM THREADS : 10
DEBUG : yes
--------------
Most off my ECM times are around 5 sec.
you might wanna try a sid limit on one or more of the cards you have, some providers limited their max sid to 4, the one i know of is canal + dutch.
I had the same problem when i could not even wach my own card deu to much emm recuests from a remote peer, so i needed to limit the max up hops on the f line and set it to max up 2, and limited the SID LIMIT: /dev/ttyUSB0 4 10.
On my own local card, just try it out or try to find out what card has a limited sid limit on it, forced by your tv provider.
Another thing that might be a problem is, did you add a new server in there and do you experiance problems from that time on, that might also be the cause of your problems, ifso you might want to limit the max up hops behind the f line of this server, and test it out.
And/or one of your remote servers is faking cards with the wel known n line faking trick, this gives you a huge drop on your side and your box gets overloaded with emm requests from one or more servers?
Don't pinpoint me on this , i just give sugestions and tips what to look for ,what you do with it is all up to you.
Good luck finding the cause of it, it might take a while to track it down, i had the same problems years ago, mainly on n card fakers and emm requests overloading my box (payservers), took a while to figure that out.
Happy sharing
Deltix1
How to get EMM and ECM from DVB signal in CCCAM?
Posting Permissions
Reply With Quote