Still a use for Opos?

[dkdexter]

I have 2 Opos 1.04 cards and tried to write them with different files from the site, but can't find any active key files. Can someone help? Maybe it can be turned into another card?

[TV_LICENCE]

opos is dead....... but you should be able to convert it to Cerebro.... not too much you can watch even then ORF I think

[dkdexter]

Great, Do you have a script/guide for winexplorer?

[TV_LICENCE]

it is here in opos section

[dkdexter]

I can't seem to find it, could you give me a link?

[Andrushenka]

Maybe you find HERE?

Oh by the way we have a search tool on this forum.....see above on your right side....

[dkdexter]

Sorry bout that, found the many scripts but was unable to complete the transfer.
It would seem both cards have org. 1.04......
A second opinion would be greatly appreciated :)

Analyze ATR:
ATR: 3B EC 00 00 40 38 4F 50 4F 53 43 41 52 44 00 0A 01 04

Convention: DIRECT
Protocol: T=0
TB1 = 00
TC1 = 00
TC2 = 38

Historical Bytes: 4F 50 4F 53 43 41 52 44 00 0A 01 04
O P O S C A R D

Programming Voltage = 0.0 volts
Programming Current = 25ma
Maximum Clock Frequency = 0.0MHz

This card uses an internal clock:
Work ETU = 0.0001041667 seconds
Guard Time = 0.0012500000 seconds
Baud Rate After Reset = 9600


Opos104erasable_Virginize.xvb
Application loaded

Now the Atmel Bootloader will be restored.
Please be patient and wait another 10 seconds

TX Data : 00 AA 55 AA 55
RX Data : 6D 00

Script Error on Line 105
Sc.GetByte: Requested Byte Exceeds Last Read Request



Opos103_Virginize.xvb(Completed without error)
Resulting "Virgin ATR"
Card 1: ATR: 40 C4 02 0A 00 00 00 00 00 09 27 20 00 81 20 00 37
Card 2: ATR: 80 00 80 58 00 07 3F 80 00 09 27 20 00 81 20 00 37


Load_OS_to_virgin_6464c_v7.xvb
Trying to reset card...
Reset Successful

Card1:
RX ATR : 00 00 80 00 00 07 3F 80 00 09 27 20 00 81 20 00 37
TX Data : 00 82 00 00 08 43 43 35 54 32 44 35 00
RX Data :

Card2:
RX ATR : 42 C4 43 0A 00 07 3F 80 00 09 27 20 00 81 20 00 37
TX Data : 00 82 00 00 08 43 43 35 54 32 44 35 00
RX Data :

Pop-Up:
no response from card. please check card and reset to get an ATR.
this may not be a virgin at90sc6464c card

[passete]

Try here : http://www.satsupreme.com/showthread...560#post822560

[dkdexter]

Try here : http://www.satsupreme.com/showthread...560#post822560

Thank you, thats the thread i found. But got some errors as posted above

[passete]

I have tranformed my opos 1.05 into a cerebro card (i think that 1.04 don't work)
first step virginise the opos with the script for opos 1.05, after use the script to change atr .
if you get an error, just try to send a cerobro file (hex), if file accepted, card is working, put orf, tnt sat, csat 022610 etc files inside ....
good luck

EDIT: i just saw a script for opos 1.04 on the pack, so it should work.