digiquest 6670hd

[divodigital]

news firmware dq6670hd

Unibox Xwindow @DQ6670HD 1514 fixed by divodigital

no channel list

346mb0m.jpg

[divodigital]

menù lemontree/Proton 1512

wi9hti.jpg

menù Xwindow_sab 1513


346mb0m.jpg

two excellent firmware fixati by divodigital

as the graphics lemontree / proton is unbeatable (in my opinion), but also xwindow_sab is not sootovalutare ....

1. get first back up the firmware vs
2. if you have the 1.16 bootloader can load with option "maincode", so the settings are
3. load it with option "Software + Bootloader" and then put the backup option vs "DB User", and you will have your setting .....

greetings

[divodigital]

Amstar_sab@DQ6670_1513

Amstar.jpg

1. get first back up the firmware vs
2. if you have the 1.16 bootloader can load with option "maincode", so the settings are
3. load it with option "Software + Bootloader" and then put the backup option vs "DB User", and you will have your setting .....




greetings

[divodigital]

Galaxy_Synaps@DQ6670_1512 fixed by divodigital


Galaxy.jpg






1. get first back up the firmware vs
2. if you have the 1.16 bootloader can load with option "maincode", so the settings are
3. load it with option "Software + Bootloader" and then put the backup option vs "DB User", and you will have your setting .....

[nufcdp]

Hi divodigital all are the firmware without settings included in abs file ?
Thankyou
Kindest Regards

[divodigital]

news firmware Galaxy Innovation fix to DQ6670 by divodigital

GI_Black_Synaps@DQ6670_1519

GI_Synaps@DQ6670_1519

[divodigital]

news firmware lemontree/proton 1518 to DQ6670hd by divodigital

Proton_Nassar@DQ6670_1518

[divodigital]

news unibox GM9060 1514 to DQ6670HD BY divodigital


GM_9060_sp@DQ6670_1514

[divodigital]

Hi divodigital all are the firmware without settings included in abs file ?
Thankyou
Kindest Regards

this test the I extracted from my decoder renamed as mediaset was added the frequency 11 373 H 29 900 DVB-S/MPEG-2 3/4 .... attention must set the configuirazione satellites based on your system .... the settings are configured like this: Hot Bird disqc 1; diseqc2 astra 19 east, 10.0 ° E Eutelsat 10A and Eutelsat 9A 9.0 ° E diseqc3, the remaining all configured diseqc 4 ... DB user with an option to load ..... let me know ....
nb: the Mediaset channels located at the end of the channel (last)
by divodigital

Italiano:
prova questo gli ho estratti dal mio decoder rinominato mediaset in quanto è stato aggiunto la frequenza 11373 H DVB-S/MPEG-2 29900 3/4 .... attenzione devi impostare la configuirazione dei satelliti in base al tuo impianto .... i settings sono configurati cosi: Hot Bird disqc 1; astra 19 est diseqc2; *Eutelsat 10A 10.0°E ed *Eutelsat 9A 9.0°E diseqc3, il restante tutti configurati diseqc 4... da caricare con opzione Utente DB..... fammi sapere ....
by divodigital
nb: i canali mediaset gli trovi alla fine dei canali (ultimi)

[nufcdp]

Thanks divodigital.
My dish is different since I have 2 LNB: Hot Bird disqc 1; diseqc2 astra 19 east
My question was not about how to downlaod settings (4 option UtenteDB in italian while downloading ABS file from usb pen).
My question was about the way to create my own settings starting from firmware without any channel included like the last one you posted here

Thanks in advance
Davide