Jtag sl35 E1

[murphy80]

How do jtag?
Excuse my English

[mici2]

JTag-ALI-SL65-35-35s



============================
=========================
Building a JTAG Interface
=========================
1. Look at ALi-6PiN-JTAG.jpg and build it up ;)
===============================
Installing GiveIO on Windows XP
===============================
1. Copy giveio.sys to C:\WINDOWS\system32\drivers
2. Go to Control Panel, open System and go to the hardware tab.
3. Click on the Device Manager button. This will open a new window.
4. In the Device Manager window, click on the View menu and select
"Show hidden devices." This will reveal a Non-Plug and Play Drivers icon
in the file tree.
5. Expand the Non-Plug and Play Drivers tree.
6. Find and right click giveio and select Properties from the popup menu.
This will bring up a window of the giveio Properties.
7. In the Properties window, select the Driver tab.
8. Select Automatic from the dropdown box for the type and Start the Driver!

================================
Flashing/Backing UP your SL65/35
================================
1. Plugin your JTag Connector! Set Jumper on the board to 1/2!
2. Flashing your Box: Go to SL65-35ALi and execute flash-sl65-35.bat and wait for a long time .....
Backing UP your Box: Go to SL65-35ALi and execute backup-sl65-35.bat and wait a little....
3. When everything is done, set Jumper on the board to 2/3 and reboot your box!
4. Enjoy your restored/backup Box!
================================
Flashing/Backing UP your SL35s
================================
1. Plugin your JTag Connector! Set Jumper on the board to 1/2!
2. Flashing your Box: Go to SL35S and execute flash-sl35s.bat and wait for a long time .....
Backing UP your Box: Go to SL35S and execute backup-sl35s.bat and wait a little....
3. When everything is done, set Jumper on the board to 2/3 and reboot your box!
4. Enjoy your restored/backup Box!

=====
NOTES
=====
When your box is flashed about 50% you can cancel the flash and the RS232 port will work!
Flashing your box will take a lot of time ....... 50% needed me ~ 12 hours!

[murphy80]

Thanks mici2!

[kinvara64]

as a new user that has an sl65 what does jtag and flashing give you. thanks

[zac2613]

as a new user that has an sl65 what does jtag and flashing give you. thanks

A Jtag is a lead that is used to flash a device chip in a receiver when the normal method don't work due to incorrect flashing of a modified firmware release, which is used to alter provider keys to receive extra channels.

Hope this helps.