AZBOX HD Premium - Premium+ - Elite - firm, image, etj..

[posedon]

Ne radhe te pare kerkoj te falur nga moderatoret per poblikumet e pa deshirura (epo keshtu te ngjan po nuk e lexon rregulloren), dhe se dyti doja ndihmen e dikujt qe disponon azbox premium per te me shpjegoje pak kete shtjellimin e meposhtem:

1. Download and extract on Your PC archive Cccam 2.1.1 AzBox HD.rar
http://www.mediafire.com/?mn2jv24zmtz
2. Connect on Your AzBox HD by FTP manager ( You can get one free File Zilla on :
https://www.ohloh.net/projects/filez...in32-setup.exe ).
3. Enter the /EMU directory and transfer there directory lib which is located in extracted archive on Your PC. When transfer is finished select all files and give CHMOD 755 to them.
4. Now, enter the OpenXCAS folder on AzBox HD receiver, so You will have /EMU/OpenXCAS , and transfer there two files : module.seq and openxcas.conf which are located in OpenXCAS folder of extracted archive. Give CHMOD 755 to that two files.
5. Now transfer in /EMU/OpenXCAS folder named as dvbapiCAS which is located in OpenXCAs directory of extracted archive. Enter in that directory, so You will have /EMU/OpenXCAS/dvbapiCAS and give CHMOD 755 to 3 files : dvbapi.sh , dvbapi_module and openxcas.conf .
6. Do not forget to add Your C or N lines to CCcam.cfg file which is located inside of /EMU/lib directory.
7. After You start dvbapiCAS from Plug-ins -> OpenXCAS -> Camd activation & priority , You can test if CCcam is running by entering this in Your Web browser : http://azboxhdip:16001 , in my Case, my AzBox HD in my LAN has IP adress 192.168.1.65, so I am entering http://192.168.1.65:16001 .

nuk e di por une kam vepruar me rregorozitet sic shkruhet me siper por kur shkoj ne http://ip e azbox:1600 nuk arrij te lidhem, mos mdoshta nuk eshte ky cccam i pershtatshmi ? nuk po e di por lutem te me ndihmoje dikush!!!

[freshmaker]

nuk po du me t ndihmuu se vetem hup kohh palidhje me kit cccam se nuk ja vlenn me instalu ta lodh kryt se un e kom pas t instalum po perveq multicasit 160D-D07 un nuk t preferoj me shti naj emu tjeter

[posedon]

degjo freshmaker qe ta bej me te thjeshte:
kam ne dispozicion 2 abonime aktive te cilat dua ti bej cs me nje kushririn tim i cili disponon dm 500 dhe une azbox premium. Tash me thuaj a eshte e mundur te behet kjo me azbox?

[freshmaker]

degjo freshmaker qe ta bej me te thjeshte:
kam ne dispozicion 2 abonime aktive te cilat dua ti bej cs me nje kushririn tim i cili disponon dm 500 dhe une azbox premium. Tash me thuaj a eshte e mundur te behet kjo me azbox?

hmm e kom ni toturial si bohet po nuk muj me t ndihmu shum se un nuk kom abonim apo kartel qe me provu shiqo nese i bjen ne fije ti :D


MANUAL



Cccam + newcs and Installation Control Center to AZBOX Ccama Footsteps
by Offside


After some colleagues have asked me about installing this EMU with newcs to read our card and share with others their ticket, I decided to put this little manual to make it easier for people to share their card starts its implementation.


Thanks to fellow terrorman, we have fabulous script to install CCcam without doing anything. In his discharge is perfectly explains what has been done, but I'll put some details to make it understandable to people who start to be put in each specific case and also install newcs and configure CCcam Control Center to start adding clines Flines and have everything at 100% and see our peers.


-- Equipment needed:

Script v1.8 by terrorman-> Download
Newcs + startup scripts-> Download
CCcam Control Center 0.3b-> Download (I put this version because it gives no problems with sight)
Maz 2.1 by Morser-> Download

* If when you download comes pulsais in the lycos website will be redirected to my space. Click on Descarregues and there are all files that have hung.

-- Installation:


1 .- Terrorman Unzip the script on the pc, will these files:

cccam
img0.png
img1.png
install.txt
www.islaremota.com.txt


2 .- Open MaZ and connect with our Azbox.


3 .- Copy the file CCAM pc we have in the root of the deco.


4 .- Go to the tab of Telnet and type the following: / CCAM , sand start the script, simply choose which version we want to install CCcam and the script will handle everything.

5 .- Once the script already have cccam on our deco. Now we have these files in the deco:



Plugins folder:Folder home

Lib folder (this is where the single file that we set, the cccam.cfg).
Folder lost + found


OpenXCAS Folder: Folder dvbapiCAS


module.seq
Now, unpack the newcs with startup scripts. We will have two folders:

Folder newcs
Folder sh

6 .- We return to Maz and we place ourselves within the OpenXCAS folder, copy the two folders here just decompress, leaving the OpenXCAS folder like this:


OpenXCAS Folder: Folder dvbapiCAS

Folder newcs
Folder sh

module.seq
ATTENTION: From this step we put all the open ports on the router and TCP / UDP.


7 .- We went into the folder and edit newcs newcs.xml to configure it to our taste (if you want), we have this:

xml version \u003d "1.0"?
<newCSconfig>
<readers name\u003d"Card Readers">
<device>
<name> upper </ name>
<type> azbox </ type>
<node> / dev / SCard </ node>
<export> yes </ export>
<enabled> yes </ enabled>
<blocksa> not </ Blocks>
<blockua> not </ blockua>
<blockga> No </ blockga>
<newcamd_port>20000</ newcamd_port> / / We want to be changed at.
<autosid> not </ autosid>
<carddetect> yes </ carddetect>
<priority> hard </ priority>
<PTShandshake> Not </ PTShandshake>
<mhz> 358 </ mhz>
<boxkey> </ boxkey>
<rsa> </ rsa>
</ device>
</ readers>
<xmlserver>
<enabled> 0 </ enabled>
</ xmlserver>
<radegastserver>
<enabled> 0 </ enabled>
</ radegastserver>
<cache>
<emm> 10 </ emm>
<ecm> -1 </ ecm>
</ cache>
<debug>
<darint39> sintoi51 </ darint39>
<level> internal </ level>
<type> all </ type>
<output> console, tcp </ output>
<logfile> / tmp / newcs.txt </ logfile>
<console_options> </ console_options>
<file_options> </ file_options>
<udp_host>192.168.1.x</ udp_host> / / Here we set the ip deco
<udp_port>9000</ udp_port> / / We want to be changed at
<udp_options> </ udp_options>
<tcp_port>1001</ tcp_port> / / Also we can change
<tcp_options> </ tcp_options>
</ debug>
<newcamdserver>
<enabled> yes </ enabled>
<name>local</ name> / / We want to be changed at
<deskey> 01 02 03 04 05 06 07 08 09 10 11 12 13 14 </ deskey>
<user>
<name>dummy</ name> / / We want to be changed at

<password>dummy</ password> / / We want to be changed at
<hostname> 127.0.0.1 </ hostname>
<port>20000</ port> / / You can change it for the we want but then we must modify the line N and to which we have.
</ user>
</ newcamd_server>
</ newCSconfig>


8 .- Once configured to our liking newcs.xml going to set the ccam.cfg. To do this we are in the plugins folder and into the lib folder, there abrmos the cccam.cfg, delete its contents and add this:



SERVER LISTEN PORT: XXXX Port for cccam, opens you want (is that He shall in all clines).

ZAP OSD TIME: 0
OSD USERNAME: root
OSD PASSWORD: azbox (default pasword, if you have another put it, we recommend you cambieis).
SHOW TIMING: no
DEBUG: no
Newcamd CONF: yes
DISABLE EMM: no
EXTRA EMM LEVEL: no
SERIAL READER: / dev/tts/0
SMARTCARD CLOCK FREQUENCY: <device> <freq>
SMARTCARD CLOCK FREQUENCY: / dev/sci0
SMARTCARD CLOCK FREQUENCY: / dev/sci1
SERIAL READER: / dev/usb/tts/0 SmartReader +
SMARTCARD CLOCK FREQUENCY: / dev/ttsUSB0 6000000
SoftKey FILE: / EMU / lib / SoftCam.Key
AUTOROLLER FILE: / EMU / lib / AutoRoll.Key
STATIC CW FILE: / EMU / lib / constant.cw
CAID PRIO FILE: / EMU / lib / CCcam.prio
PROVIDERINFO FILE: / EMU / lib / CCcam.providers
CHANNELINFO FILE: / EMU / lib / CCcam.channelinfo
LOG WARNINGS: / tmp / warnings.txt
MINIMUM DOWNHOPS:
ALLOW TELNETINFO: yes
WebInfo ALLOW: yes
WebInfo USERNAME: Name (the one you want, then you have to configure in the CCcam Control Center (CCC) in config.php)
WebInfo PASSWORD: Pass (the one you want, then you have to configure it in the CCC, in config.php)
WebInfo LISTEN PORT:XXXX (Port you have to configure in the SAC, in config.php).

# # # Newcamd (local) / / Here we will post the links to the N newcs:
N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
(This is N by default if you have not modified to read our local newcs)

# # # C-Lines and F-Lines # # # / / Here we set the clines with this syntax and flin:
# C: <cuenta_dyndns.org> <puerto_cccam> <user_cccam> <pass_cccam> no (0:0:2)
# F: <user you've given in cline> <pass you've given in cline> 2 0 0 (0:0:2) () () <host your peer>


* With this syntax we have to change if we want more hop2 the 2 by the number "we want."

9 .- We take these attributes for the following files:
Plugins folder:
Folder home-> We left as is.
Lib folder-> All files to 755.
Folder lost + found-> We left as is.
OpenXCAS Folder: Folder dvbapiCAS

dvbapi_module-> 755

openxcas.conf-> 644 Folder newcs
newcs-> 755

newcs.xml-> 644

openxcas.conf-> 644 Folder sh-> All files to 644


module.seq-> 644
10 .- Reboot the Reciver


11 .- We now have our fully configured EMU, we have simply set the CCcam Control Center to visualize the activity of our peers. Download the program and installed it. The installation program I believe it comes in Czech but it is easy to see what would be the next button. Click it until the end.


12 .- CCcam Control Center and open on the main screen you will see that there is a column of options on the left. Tap "Config.php"Set this up with data that we have previously in cccam.cfg:
<? php

//---------------------------------------
/ / CONFIG
//---------------------------------------
/ / examples of server definitions
$ CCCamWebInfo [] \u003d array ( "ip deco""WebInfo LISTEN PORT""WebInfo USERNAME""WebInfo PASSWORD"); / / For CCcam webinterface with user and pass
# $ CCCamWebInfo [] \u003d array ( "localhost", "12345"); / / for CCcam webinterface with different port than default and without user and pass
# $ CCCamWebInfo [] \u003d array ( "localhost"); / / for CCcam webinterface with all defaults
$ work_path \u003d "" / / set this if you want working folder separate / / Example $ work_path \u003d "/ tmp /";
$ update_from_button \u003d true, / / set to true if you want Update button (useful if update is from remote server and takes too long)
$ fullReshare \u003d true, / / shows maximum Reshare if more than one route for same node / / set to true to see actual Reshare instead of YES / NO
$ country_whois \u003d true, / / use whois for country detection
?>


13 .- Save and go to the main screen. There we will see a yellow button "UPDATE", the press and see the information of our peers.



NOTE: If we do not Flines clines and is very likely that when we press the button to update or leaving strange symbols. Once we have the clines and Flines updated correctly, sometimes take a while but click once and wait.
14 .- Enjoy our deco ... hehe.


And that's all, these steps I currently have 2.1.1 + newcs cccam with Cinderella working 100% with the last signature on 0.9.3686.

If anyone has a problem putting it into the thread to see if we solve it together.
Thanks to everyone who helped me set up this fantastic EMU, the truth is that in our Azbox going very well, without breaks or stoppages and quick.

[posedon]

Me ne fund pas shume kerkimesh dhe provash gjeta zgjidhjen me te mire dhe qe punon perfekt dhe mjaft i thjeshte ne perdorim. eshte nje program me te cilin pasi ke plotesuar ftp ip, username dhe password, vendos c line aktive qe ke dhe gjithcka realizohet ne menyre automatike. mire eashte qe ne azbox te mos kesh tjeter cam te instaluar.une e provova dhe gjithcka shkoi shume mire

[posedon]

Ja dhe Maz 2,2

[freshmaker]

Me ne fund pas shume kerkimesh dhe provash gjeta zgjidhjen me te mire dhe qe punon perfekt dhe mjaft i thjeshte ne perdorim. eshte nje program me te cilin pasi ke plotesuar ftp ip, username dhe password, vendos c line aktive qe ke dhe gjithcka realizohet ne menyre automatike. mire eashte qe ne azbox te mos kesh tjeter cam te instaluar.une e provova dhe gjithcka shkoi shume mire

po me sa e di un me ket munesh me perdor vetem 1 cline nuk besoj qe bon ma shum :D

[posedon]

po, eshte e ertete, por po ke c line me shume se 1 mund ti gitesh ne menyre manuale

[freshmaker]

po, eshte e ertete, por po ke c line me shume se 1 mund ti gitesh ne menyre manuale

nuk besoj qe e supportonnnn

[posedon]

A po din freshmaker me cheopscam funksionon gje? Tring, digitalb?