Any Question About Xcruiser Ask Me

[Valdazzar]

Ok about scheduled recording. I will write down this because a lot of peoplle may have a problem. When you connect an extrenal hdd you have to wait until it is recognised (some seconds). Then you choose record once etc and the time you want the recording to start. Then when you choose duration it has a blue icon and you can't choose it. You have to write it by yourself 1 hour 30 mins with numbers and it will record your program.

Now I 've got a new question. Can I transfer a recorded movie from the decoder directly to my pc via lan? If yes, how can I do it? Thanks

[tarey888]

Answer to your Question is NO because this model Doesn't Support FTP
you can Connect your HDD to PC and Copy the recorded files but VIA Lan not possible

[Valdazzar]

Here I am again with a new (and I hope the last) problem. I connected my hd and I recorded some tv programs. Then I switched off the decoder and the HDD on the dock. When I switch it on it doesn't recognise the hdd. It doesn't recognise it even if I unplug the usb and replug it. The way that I found it worked was to upgrade the software again (2.77) so the decoder reboots itself and reboot the hdd. And the other way was to unplug both the decoder and the hdd from the power source for 10 seconds and then replug them. It reboots and it recognise it so I can record. If it doesn't recognise it, it shows that there is the hdd but it can't do anything, nor playback nor record.


And after regognise it it shows only some recorded tv shows not all. They seem to me as random. I mean it shows me the recorded shows 1,2,8,9 while missing the 3,4,5,6,7. But if I plug it to my pc all the recordings exist. How can I force my decoder recognise the hdd so I won't have to cut the power source every time I need the hdd? Thanks.

[ashrafgned]

Dear xdsr
i have a xcruiser xdsr hd receiver and my prpolem is that the receiver cant read any cccamd file any more even when i press the f2 button no menu appears at all on the screen , although i had updated my devise to the latest vergion , pls tell me what to do . and how i can do it
thank you

[Valdazzar]

Where is tarey888?

[tarey888]

Dear xdsr
i have a xcruiser xdsr hd receiver and my prpolem is that the receiver cant read any cccamd file any more even when i press the f2 button no menu appears at all on the screen , although i had updated my devise to the latest vergion , pls tell me what to do . and how i can do it
thank you

Press Menu => STB Setup => Security Setup => type the Password 3333 now exit and Install your CCCAMD.CONF file

For Illustration guide please follow this How to use CCCAM in XDSR Pro

[tarey888]

Here I am again with a new (and I hope the last) problem. I connected my hd and I recorded some tv programs. Then I switched off the decoder and the HDD on the dock. When I switch it on it doesn't recognise the hdd. It doesn't recognise it even if I unplug the usb and replug it. The way that I found it worked was to upgrade the software again (2.77) so the decoder reboots itself and reboot the hdd. And the other way was to unplug both the decoder and the hdd from the power source for 10 seconds and then replug them. It reboots and it recognise it so I can record. If it doesn't recognise it, it shows that there is the hdd but it can't do anything, nor playback nor record.


And after regognise it it shows only some recorded tv shows not all. They seem to me as random. I mean it shows me the recorded shows 1,2,8,9 while missing the 3,4,5,6,7. But if I plug it to my pc all the recordings exist. How can I force my decoder recognise the hdd so I won't have to cut the power source every time I need the hdd? Thanks.

Hi

Can you test Using different USB cable in Different Port in Receiver

[tarey888]

Where is tarey888?

hi Dear Where are you ?

[ashrafgned]

hi
i have a xcruiser xdsr hd pro receiver , and i have a qustion , how can i install the files with the UDT extension . like that one in the link http://www.xdsrup.com/HD_Hot-ASTRA_FEB_2011.zip thank you

[tarey888]

hi
i have a xcruiser xdsr hd pro receiver , and i have a qustion , how can i install the files with the UDT extension . like that one in the link http://www.xdsrup.com/HD_Hot-ASTRA_FEB_2011.zip thank you

Copy UDT file in USB and Connect USB to Receiver press Menu => Installation => User Data Manager => Select your Disk and follow the Color code
actually i don't Remember Exactly what color key will work for What
any way i will write it If you Press Red key from Remote it will Copy Data file from USB to STB and if you Press Green Key It will Copy Data from STB to USB so please check and follow the Suitable Key to Copy UDT file from USB to STB and reply for other Users
please let me know if any mistake from my side