Oscam YMOD - Bulcrypt 1

[ceco2000]

Не мога да компилирам затова ползвам ymod око ми направиш един ще съм много благодарен

ето колега готова компилирана за 500S http://www.satsupreme.com/download.p...f-Distribution

и конфиг файлове http://www.satsupreme.com/download.p...onfig-Bulcrypt, ако картата е версия 1 трябва да запали

[Geryl]

Това не е ред а файл oscam.dvbapi ,има два начина да го създадеш 1.отвори оскам в интернет браузера като напишеш айпито на приемника и след него :8888 ,там има files -> oscam.dvbapi ,напиши ги и след това сейф и рестарт на оскама.2.създаваш файла и с FTP го копираш при другите.

[mminkov]

напишеш айпито на приемника и след него :8888

Ами ако слуша на друг порт - при мен не е 8888

[Geryl]

Порта го дадох защото така е пуснал че са му настройките сори ако съм сгрешил

[iv3]

Не мога да компилирам затова ползвам ymod око ми направиш един ще съм много благодарен

ето колега готова компилирана за 500S http://www.satsupreme.com/download.p...f-Distribution

и конфиг файлове http://www.satsupreme.com/download.p...onfig-Bulcrypt, ако картата е версия 1 трябва да запали

След като пробвах тези фйлове това е новият ми лог
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 02:00:19 1970
-------------------------------------------------------------------------------
1970/01/01 02:00:19 0 s starting thread log_list_thread
1970/01/01 02:00:19 0 s log_list_thread thread started
1970/01/01 02:00:19 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7166 (powerpc-tuxbox-linux-gnu)
1970/01/01 02:00:19 0 s version=1.20-unstable_svn, build #7166, system=powerpc-tuxbox-linux-gnu, nice=10
1970/01/01 02:00:19 0 s client max. idle=240 sec, debug level=0, filter_sensitive=1
1970/01/01 02:00:19 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
1970/01/01 02:00:19 0 s client timeout=8000 ms, fallback timeout=5000 ms, cache delay=300 ms
1970/01/01 02:00:19 0 s The current system time is smaller than the build date (Jul 11 2012). Waiting up to 60 seconds for time to correct
2012/07/12 13:42:09 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2012/07/12 13:42:09 0 s userdb reloaded: 4 accounts loaded, 0 expired, 1 disabled
2012/07/12 13:42:09 0 s signal handling initialized (type=sysv)
2012/07/12 13:42:09 0 s 983 service-id's loaded in 45ms
2012/07/12 13:42:09 0 s 4 tier-id's loaded
2012/07/12 13:42:09 0 s 2 provid's loaded
2012/07/12 13:42:09 0 s 0 lengths for caid guessing loaded
2012/07/12 13:42:09 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s monitor: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s camd35: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s cs378x: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s newcamd: initialized (fd=6, port=9500, crypted)
2012/07/12 13:42:09 0 s -> CAID: 5581 PROVID: 000000
2012/07/12 13:42:09 0 s Starting listener 1
2012/07/12 13:42:09 0 s newcamd: initialized (fd=7, port=9501, crypted)
2012/07/12 13:42:09 0 s -> CAID: 4AEE PROVID: 000000
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s cccam: initialized (fd=8, port=13000, crypted)
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s pandora: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s radegast: disabled
2012/07/12 13:42:09 0 s starting thread http
2012/07/12 13:42:09 0 s http thread started
2012/07/12 13:42:09 0 s starting thread reader check
2012/07/12 13:42:09 0 s reader check thread started
2012/07/12 13:42:09 0 s starting thread check
2012/07/12 13:42:09 10154510 h HTTP Server listening on port 16003
2012/07/12 13:42:09 0 s check thread started
2012/07/12 13:42:09 0 s bulcrypt [internal] creating thread for device /dev/sci0
2012/07/12 13:42:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/12 13:42:09 0 s waiting for local card init
2012/07/12 13:42:09 10155D40 r bulcrypt [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=340, cardmhz=340)
2012/07/12 13:42:10 10155D40 r bulcrypt [internal] card detected
2012/07/12 13:42:11 10155D40 r bulcrypt [internal] ATR: 3B 20 00
2012/07/12 13:42:12 10155D40 r bulcrypt [internal] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.40 Mhz
2012/07/12 13:42:13 10155D40 r bulcrypt [internal] Card detected.
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] CAID: 0x4AEE|0x5581, CardType: 0x4c, Serial: #############, HexSerial: ########
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] Ready for requests.
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] found cardsystem bulcrypt
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Reading subscription info.
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data last update : 2012-07-12 11:24:51 GMT
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription should be active to : 2012-08-12 11:24:51 GMT
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data 1 (0x00a6): +-+--++-
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data 2 (0x00a6): +-+--++-
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 02 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 04 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 20 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 80 is active:
2012/07/12 13:42:15 0 s init for all local cards done
2012/07/12 13:42:15 1017A280 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2012/07/12 13:42:15 1017A280 c dvbapi: 3 entries read from oscam.dvbapi
2012/07/12 13:42:15 1017A280 c dvbapi: found pmt file /tmp/pmt.tmp
2012/07/12 13:42:15 1017A280 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0D49 PROVID: 000000
2012/07/12 13:42:15 1017A280 c dvbapi: new program number: 03EB (BNT 1) [pmt_list_management 3]
2012/07/12 13:42:15 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 1E 0E EB 4D E5 39 D3 22 88 B4 A2 60 57 1D 44 A5 90 00
2012/07/12 13:42:15 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xf9 got 0x94)
2012/07/12 13:42:15 1017A280 c starting thread housekeeping lb stats
2012/07/12 13:42:15 1017A280 c housekeeping lb stats thread started
2012/07/12 13:42:15 1017A280 c dvbapi: try pids again #1
2012/07/12 13:42:15 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (92 ms) by bulcrypt
2012/07/12 13:42:15 1017A280 c dvbapi: try pids again #2
2012/07/12 13:42:15 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (61 ms) by bulcrypt
2012/07/12 13:42:16 1017A280 c dvbapi: try pids again #3
2012/07/12 13:42:16 1017A280 c dvbapi: can't decode channel
2012/07/12 13:42:16 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (187 ms) by bulcrypt
2012/07/12 13:42:17 1017A280 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0D49 PROVID: 000000
2012/07/12 13:42:17 1017A280 c dvbapi: new program number: 03EB (BNT 1) [pmt_list_management 3]
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 D0 06 E5 32 80 04 51 63 6B CD E7 FB 2D F5 C4 20 90 00
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum1 mismatch expected 0x69 got 0x5b)
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xd4 got 0xfd)
2012/07/12 13:42:17 1017A280 c dvbapi: can't decode channel
2012/07/12 13:42:17 1017A280 c dvbapi (5581&000000/0000/03EB/4F:C86F): not found (91 ms) by bulcrypt
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 33 7F A0 A9 FA EC D1 E6 E7 9B AE 32 66 FA 1A 11 90 00
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum1 mismatch expected 0x68 got 0x34)
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xf5 got 0x20)
2012/07/12 13:42:29 1017A280 c dvbapi: can't decode channel

[veskop]

След като пробвах тези фйлове това е новият ми лог
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 02:00:19 1970
-------------------------------------------------------------------------------
1970/01/01 02:00:19 0 s starting thread log_list_thread
1970/01/01 02:00:19 0 s log_list_thread thread started
1970/01/01 02:00:19 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7166 (powerpc-tuxbox-linux-gnu)
1970/01/01 02:00:19 0 s version=1.20-unstable_svn, build #7166, system=powerpc-tuxbox-linux-gnu, nice=10
1970/01/01 02:00:19 0 s client max. idle=240 sec, debug level=0, filter_sensitive=1
1970/01/01 02:00:19 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
1970/01/01 02:00:19 0 s client timeout=8000 ms, fallback timeout=5000 ms, cache delay=300 ms
1970/01/01 02:00:19 0 s The current system time is smaller than the build date (Jul 11 2012). Waiting up to 60 seconds for time to correct
2012/07/12 13:42:09 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2012/07/12 13:42:09 0 s userdb reloaded: 4 accounts loaded, 0 expired, 1 disabled
2012/07/12 13:42:09 0 s signal handling initialized (type=sysv)
2012/07/12 13:42:09 0 s 983 service-id's loaded in 45ms
2012/07/12 13:42:09 0 s 4 tier-id's loaded
2012/07/12 13:42:09 0 s 2 provid's loaded
2012/07/12 13:42:09 0 s 0 lengths for caid guessing loaded
2012/07/12 13:42:09 0 s can't open whitelist file /var/tuxbox/config/oscam.whitelist
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s monitor: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s camd35: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s cs378x: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s newcamd: initialized (fd=6, port=9500, crypted)
2012/07/12 13:42:09 0 s -> CAID: 5581 PROVID: 000000
2012/07/12 13:42:09 0 s Starting listener 1
2012/07/12 13:42:09 0 s newcamd: initialized (fd=7, port=9501, crypted)
2012/07/12 13:42:09 0 s -> CAID: 4AEE PROVID: 000000
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s cccam: initialized (fd=8, port=13000, crypted)
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s pandora: disabled
2012/07/12 13:42:09 0 s Starting listener 0
2012/07/12 13:42:09 0 s radegast: disabled
2012/07/12 13:42:09 0 s starting thread http
2012/07/12 13:42:09 0 s http thread started
2012/07/12 13:42:09 0 s starting thread reader check
2012/07/12 13:42:09 0 s reader check thread started
2012/07/12 13:42:09 0 s starting thread check
2012/07/12 13:42:09 10154510 h HTTP Server listening on port 16003
2012/07/12 13:42:09 0 s check thread started
2012/07/12 13:42:09 0 s bulcrypt [internal] creating thread for device /dev/sci0
2012/07/12 13:42:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/12 13:42:09 0 s waiting for local card init
2012/07/12 13:42:09 10155D40 r bulcrypt [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=340, cardmhz=340)
2012/07/12 13:42:10 10155D40 r bulcrypt [internal] card detected
2012/07/12 13:42:11 10155D40 r bulcrypt [internal] ATR: 3B 20 00
2012/07/12 13:42:12 10155D40 r bulcrypt [internal] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.40 Mhz
2012/07/12 13:42:13 10155D40 r bulcrypt [internal] Card detected.
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] CAID: 0x4AEE|0x5581, CardType: 0x4c, Serial: #############, HexSerial: ########
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] Ready for requests.
2012/07/12 13:42:14 10155D40 r bulcrypt [internal] found cardsystem bulcrypt
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Reading subscription info.
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data last update : 2012-07-12 11:24:51 GMT
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription should be active to : 2012-08-12 11:24:51 GMT
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data 1 (0x00a6): +-+--++-
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Subscription data 2 (0x00a6): +-+--++-
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 02 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 04 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 20 is active:
2012/07/12 13:42:14 10155D40 r bulcrypt [bulcrypt] Package 80 is active:
2012/07/12 13:42:15 0 s init for all local cards done
2012/07/12 13:42:15 1017A280 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2012/07/12 13:42:15 1017A280 c dvbapi: 3 entries read from oscam.dvbapi
2012/07/12 13:42:15 1017A280 c dvbapi: found pmt file /tmp/pmt.tmp
2012/07/12 13:42:15 1017A280 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0D49 PROVID: 000000
2012/07/12 13:42:15 1017A280 c dvbapi: new program number: 03EB (BNT 1) [pmt_list_management 3]
2012/07/12 13:42:15 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 1E 0E EB 4D E5 39 D3 22 88 B4 A2 60 57 1D 44 A5 90 00
2012/07/12 13:42:15 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xf9 got 0x94)
2012/07/12 13:42:15 1017A280 c starting thread housekeeping lb stats
2012/07/12 13:42:15 1017A280 c housekeeping lb stats thread started
2012/07/12 13:42:15 1017A280 c dvbapi: try pids again #1
2012/07/12 13:42:15 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (92 ms) by bulcrypt
2012/07/12 13:42:15 1017A280 c dvbapi: try pids again #2
2012/07/12 13:42:15 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (61 ms) by bulcrypt
2012/07/12 13:42:16 1017A280 c dvbapi: try pids again #3
2012/07/12 13:42:16 1017A280 c dvbapi: can't decode channel
2012/07/12 13:42:16 1017A280 c dvbapi (5581&000000/0000/03EB/4F:9776): not found (187 ms) by bulcrypt
2012/07/12 13:42:17 1017A280 c dvbapi: [ADD PID 0] CAID: 5581 ECM_PID: 0D49 PROVID: 000000
2012/07/12 13:42:17 1017A280 c dvbapi: new program number: 03EB (BNT 1) [pmt_list_management 3]
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 D0 06 E5 32 80 04 51 63 6B CD E7 FB 2D F5 C4 20 90 00
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum1 mismatch expected 0x69 got 0x5b)
2012/07/12 13:42:17 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xd4 got 0xfd)
2012/07/12 13:42:17 1017A280 c dvbapi: can't decode channel
2012/07/12 13:42:17 1017A280 c dvbapi (5581&000000/0000/03EB/4F:C86F): not found (91 ms) by bulcrypt
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Possibly unsupported codeword (bulcrypt v2): 0A 11 C0 33 7F A0 A9 FA EC D1 E6 E7 9B AE 32 66 FA 1A 11 90 00
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum1 mismatch expected 0x68 got 0x34)
2012/07/12 13:42:29 10155D40 r bulcrypt [bulcrypt] Invalid CW (cksum2 mismatch expected 0xf5 got 0x20)
2012/07/12 13:42:29 1017A280 c dvbapi: can't decode channel

[bulcrypt] Possibly unsupported codeword (bulcrypt v2)

[atilla74]

С какъв модел операторски приемник ти върви картата?

Това се знае засега:
- 100 - ??
- 201 - v1
- 202 - v2
- 203 - v1
- 300 - v2
- ZHD - v2

[iv3]

Имам два приемника ZHD и STB-s300 май и дветекарти са v2

[ceco2000]

Имам два приемника ZHD и STB-s300 май и дветекарти са v2

точно така и двете ти карти са версия 2 и в лога го показва така

[iv3]

Имам възможност да взема един приемник който е STB-s1002 картата не е била активна повече от година
Дали да рискувам да я ативирам и дали ще мия акивират или ще икат да ми я сменят снова