nuk jemi jashte teme te flasesh per paisje dhe lnb edhe pse te vjetra nuk dmth se je jashte teme, jemi te gjithe brenda teme mendoj.
nuk jemi jashte teme te flasesh per paisje dhe lnb edhe pse te vjetra nuk dmth se je jashte teme, jemi te gjithe brenda teme mendoj.
Kjo ketu eshte nje nga LNB e ardhshme qe do te hyjne ne funksion shume e fuqishme dhe me dalje per tu transmetuar me fiber optike ku sinjalin mund ta cosh me km te tera.
307610f_tol32_fibre_lnb_1_260x174LNB OPTIK.png
307610f_tol32_fibre_lnb_2_259x212.png
kjo eshte nje skeme ku mund te cosh sinjal nepermjet fibrit optik dhe LNB Trasmeter ne nje kompleks pallatesh duke mos pas humbje ne sinjal
Re: Aksesore dhe pajisje satelitore etj..
po mire more Aldo 224 sa kushton kjo mrekulli
po pse blehet mrekullia? prandaj eshte mrekulli se nuk blehet dotOriginally Posted by adri76
shume, mendoj qindra euro.
Normalisht perderisa behet fjale per nje cilesi dhe kualitet te larte atehere kjo ka nje kosto relativisht te larte besoj dhe une si ju. Por me sa une kam dijeni metri i fibrit optik per te mare dhe transmetuar nje fluks sinjali te tille nuk besoj se e kalon 1 euro ndersa LNB-ja cfardo kostoje te kete nuk besoj se do te kape ndonje shifer rekord te paaritshme. Sa te jene shoket dhe miqte tane kineze cdo gje behet e paperfillshme dhe shume e lehte per tu arritur dhe per ta shijuar kushdo, por kjo normalisht eshte dicka e sapo dale dhe normalisht duhet te kete ndonje kosto vetem si LNB se per kabllin e thashe dhe me lart nuk besoj se e kalon 1 euro metrin. Po kjo ketu lart eshte nje skeme qe besoj ta kenaq syrin dhe nje gje e bukur pa shume andralla si keto qe arrijme te krijojme tani.
LNB Transmeter
Fibre optic solutions
Triax TOL 32 Optical LNB transmitter.
307610f_tol32_fibre_lnb_1_260x174 LNB.png
First of its kind, with four polarities in one fibre cable. One laser only. A customised satellite solution. Fully passive cabling/distribution in the fibre optic domain. If you want to add CATV to your installation simply run one more fibre – and use it with the HFC (see below).
Need more positions - Simply use one more TOL 32 and cabling for each.
Triax TOS – Optical Splitters.
307634f_tos04_optical_1x4_splitter_1_260x193spliter.png
Choose between 2, 4 and 8 way optical splitters – and split your signal into as many
as 32 ways in a single MDU installation. They fit both HFC and Optical LNB ranges. All splitters are dual-windows technology (1310 and 1550 nm) which allows you full upward compatibility when used in HFC networks. By the way, if what you really want is an LNB unit that can handle an overwhelming 128 optical splits, just let us know. We can help you with that too.
307624fr_tvq04_virtual_quattro_converter_259x193.png
Triax Virtual Optical Converters.
SAT-IF receiver nodes for TWIN, QUAD and QUATTRO signals. Receives optical signal from LNB via the passive optical network – and then turns the signal into a coax output through two or four (TWIN or QUAD) universal lines, each linked to a set top box. The QUATTRO version presents the four individual polarities on separate coax outputs – and are perfectly capable of driving a regular multiswitch system. Generally, these converters accept and bridge an optical link budget from the optical LNB transmitter (see above) equivalent of splitting into 32 ways – and still they can cover distances of more kilometres.
Triax Fibre Optical connectors
Steel armored 3.0 mm fibre optic cable (G657A, LSZH) pre-connected for easy installation. On-site-connectors for use with unterminated cables (No need for fusion-splicing). Barrel connectors allow components to be used with all products.
30750xfl_otxs_0x_optical_transmitter_[xmw]-1_260x76xxx.png
Triax HFC - Hybrid Fibre Coax Optical Transmitter (OTXS-xx series)
Converts electrical CATV signals into intensity modulated optical signals for transmission via optical fibre cables. Signal distribution over distances from 200 metres to 10-15 kilometres. Splits into several directions if needed. Fibre optic cable is terminated at fibre optic receiver nodes (ORB 9X1) – from where traditional coax based MATV/CATV can be realised. Remote controllable via the internet.
Triax HFC - Hybrid Fibre Coax Optical Receiver (ORB 9X1 series)
Fibre optic receiver node. For CATV installations. Return path possible via separate laser. Use HFC as in a regular coax installation – but with the benefit of using fibre as an extension cord. Perfect, if you need islands of CATV installations without having to worry about the distance from the headend and fibre optic transmitter.
When you switch to fibre – you get these new business options:
You can reach A LOT more users – and cover larger distances, even kilometres, without jeopardising the signal.
Flexibility doesn’t begin to describe it.
On top of this, your installations will be future friendly and internet/broadband ready – you get full scalability, so you can extend the installation at a later time.
With coax that is usually impossible.
What else Well, fibre optics will allow you to
gain a larger market share in the field of satellite IF-distribution – leaving old-fashioned ‘multiswitch competitors’ behind at the Museum of Coax Installations …
"Distribution switches, as used in most MDU networks today are no longer required with this system," ref.: TELE-satellite & Broadband 2008.
Fibre installation on-site..
For most installations our fibre-optics cables with pre-fitted connectors are the easiest and fastest solution.
If you don’t find the correct length, simply add two or more cables together using the small barrel connector.
For tight spaces and odd lengths use our 500 m fibre optics cable roll and fit it with fast-fit connectors in the field using inexpensive fibre optics cutting, stripping and cleaning tools.
No need for expensive fusion-splicer equipment. But if you have one already you are of course free to use it.
Agreed: this is different from coax cabling and you probably will spend some more time on your first installation. But once you get used to working with fibre cables, you will find it hard to go back.
Perkethimin e ben miku jone google. Bejeni vete
A di ndonjeri si behet konfigurimi i LNB Alps-QTT Quattro Rocket Feed BSTE9-101A ne aparat dreambox 800s sepse kam blere nje dhe po vij verdalle dhe nuk po e bej dot
Me sa shoh ne figure kjo eshte nje koke per kater aparate ,jo per kater satelite.Pra me kete koke mund te lidhesh kater aparate satelitore dhe secili punon i pavarur nga tjetri.Konfigurimine DM 800??? si gjithe Lnb e tjera.Ky eshte mendimi im.
Pikerisht koka eshte per kater aparate te pavarur. Daljet ne kete koke jane 1.high-horizontal 2.high-vertikal 3.low-horizontal 4.low-vertikal provoj te bej konfigurimin ne dreambox (qe sipas meje e bej ne rregull) por nuk kam sinjal nderkohe qe kur e provoj me koke teke pozicionin e kokes me parabolen kam sinjal 92% pra problemi qendron qe une nuk po e ve ne pune koken ne rregull
Posting Permissions
